Your electric dab rig is a quality vaping investment. By taking good care of it, you will be guaranteed of having good flavorful sessions over the years. It does not matter whether you have an ordinary dab pen or an excellent dab rig, the frequent maintenance will be the key.
Most individuals do not know that a bit of cleaning and care can end up increasing the life of their devices by a very long margin. A good quality electric dab rig will last longer, have cleaner flavor, and will save you money in their replacement. The good news? Maintaining your device and keeping it in good condition does not take long and does not consume many efforts.
Here we are going to discuss some of the basic maintenance details that will ensure that your electric dab rig is functioning optimally. Whether you are cleaning your vape daily or in the long term strategy, you will know all that is required to keep your vaping investment safe. We shall find out how good maintenance can turn your performance and life of your device.
The importance of the Electric Dab Rig Maintenance
Keeping your electric dab rigs clean is not all that maintenance is, as it has a direct effect on the quality of your vaping and the life of your device. It is important to know why maintenance is important, so that you can establish better care habits.
Quality of better Flavour: This is because residue accumulated in a session will influence the taste. Pure and untainted flavor off your concentrates is provided by clean heating elements and chambers. Each of the hits is just as it ought to be with no burning or stale waits.
Better Performance: Dab rigs tend to work well in cases where everything goes smooth. Accretion limits the airflow, decreases the amount of vapor, and causes battery overstrain. Cleaning helps to keep the best levels of performance.
Long life of devices: The devices can be prolonged in the event of proper care. Both the cheap and more expensive electric dab rigs can last 2-3 years or longer with proper maintenance and fall out of functionality in months when not well taken care of. The difference is dramatic.
Cost Savings: The replacement of heating elements and batteries is an expensive process. Maintenance will reduce the number of replacements and repairs. You save more by taking a bit of time to be taken care of.
Robert Martinez, who is a vaping technician, says that he has seen the same devices, one well-kept and the other poorly kept. The rig maintained has served a full three years and is in excellent condition whereas the one that was neglected failed in eight months. That is the mighty power of maintenance.
Everyday Cleaning of Your Dab Rig
Developing simple daily habits will maintain your dab rig in a good condition without having to put many efforts into it. These short-cut procedures avoid serious issues when they begin.
Wipe After Use: Cleaning your electric dab rig When your electric dab rig is ready, wipe the mouthpiece and the inside of the chamber with a cotton swab or a soft cloth. This will wash away any fresh residue before it gets hard and difficult to wash.
Chamber Empty: Do not leave concentrate your dab rig. Eliminate post-session unused material. Unused concentrate may incinerate onto heating elements causing difficult to remove deposits.
Check Connection Points: The areas where the components are attached are examined such as battery to atomizer, mouthpiece to body. These areas of threading should be wiped frequently. Clean connections provide correct flow of power and eliminate device problems.
Quick Airflow Test: Turn off your dab pen or rig and draw air through it. When you find that breathing is limiting then it is time to do extra cleaning. Blockages can be prevented at an early stage.
Such routines are only a few minutes but cause enormous effects in the end result (performance and cleanliness).
How to Clean Your Electric Dab Rig
On top of regular maintenance, the electric dab rig will require deep cleaning at intervals to get rid of stubborn gunk and resume optimum performance. Have these complete cleanings once in 1-2 weeks as per the frequency of use.
Take Apart: Take apart all the removable parts and make sure you dismantle them carefully; mouthpiece, chamber, atomizer, and any glass parts on the device. Always refer to the manual of your device on correct ways of dismantling the device to prevent breaking of fragile components.
Wet parts: Put non-electronic parts in the isopropyl alcohol (90 percent has been shown to be the most effective). Let them soak for 15-30 minutes. The alcohol removes the residue of the concentration that can not be removed by wiping.
Scrub Gently: Soft brushes, cotton swabs or pipe cleaners can be used to scrub damp areas. Extra attention is to be paid to narrow openings and threading. Do not apply rough substances that may end up scratching surfaces.
Rinse Thoroughly: Rinse the entire parts with warm water in order to remove the alcohol and the loosened residue after washing. Wipe off all the water and leave everything to dry thoroughly and then reassemble.
Wash Clean Electronic Parts: Do not immerse batteries and electronic parts in liquid. Rather, clean these areas with cotton swabs that were moistened with alcohol. Blot on paper towel.
Replacement of Parts and Components
Despite the high maintenance, certain parts of the electric dab rigs require changing after some time. Replacement is something you know when and how to do it to ensure your device is operating well.
Heating Elements: Coils, atomizers and quartz buckets are worn out with time. Change these after every 2-6 months with frequency of use. Symptoms of replacement that include a decreased production of vapour, burnt flavour or visible damage are symptoms of replacement.
Batteries: The dab rig batteries have a life of 1-2 years when taken care of. The battery life will reduce significantly even when it is fully charged and it is time to replace. A large portion of the devices will have replaceable batteries, and some devices will have to replace the entire unit.
Seals and O-Rings: These are small rubber seals that avoid leakages and proper airflow. Replacement is necessary on cases of air leakage or liquid escapes. They are cheap and can be readily replaced.
Glass Components: Glass bongs, bubblers and mouthpieces will break even when handled with care. Have spares around, glass parts, most commonly those that are used a lot. There are replacement parts in Lookah and other good brands.
By the use of original replacement parts you are able to preserve the performance and safety standards of your device. There is always a tendency that generic components can fit yet they do not resemble original quality.
Storage and Travel Care
Storing and transportation of your electric dab rig can influence its state and its life span. Adequate storage ensures that nothing is damaged, and your device is available at any time.
Protective Cases: Invest in the use of a padded case that fits a vaporizer or dab pen. The cases prevent falls, hits, and compression. Most of them fit the gadget and other accessories such as cleaning aids and containers of the concentrate.
Place the store upright where possible: To avoid the spilling of concentrate in the effected areas, have the dab rig standing. This easy practice will make cleaning less often, and sticky messes will be avoided.
Control Temperature: It is recommended that devices should be stored in cool and dry places not near direct sunlight and heating devices. Batteries are harmed by extreme temperatures and are affected by degradation of materials. Storage at room temperature is the best.
Empty Before Travel: Don’t take your concentrate loaded in a device and travel. When you are going out, empty and clean your electric dab rig. This ensures that there is no leakage and that security screening is easy where the device is legal.
Bolster Loose Parts: Be sure that all the parts are correctly secured or detached and place them away before the transportation of your device. Components that are loose may end up damaging themselves or other parts of the component during transportation.
Problem Solving Guide to Common Issues
Learning to identify the typical issues and challenges in the dab rig assist you to keep the dab rig working best. A lot of troubles can be solved by mere maintenance.
Weak Vapor Production: This usually means that there is dirty heating coil or low battery charge. Wipe the atomizer and make sure that your battery is charged. In case of issues, the heating component may require a replacement.
Burnt Taste: This is caused by the residue or overheating that brings about the burnt flavors. Wipe you chamber and heating element. Ensure that you have the correct temperatures on your type of concentrate.
Connection Issues: When your dab pen will not turn on or does not recharge, clean everything that is connected. Always ensure that components are screwed in the right place and not tightly.
Obstructed Airflow: Obstructed airways decrease the quality of draws. Completely wipe mouthpieces, chambers and passages. Clean narrow spots by means of pipe cleaners.
Battery Runs a Minute: This will indicate battery aging or power-draining accumulation. Wipe all the connections and maintain good charging behaviors. In case of problems, a battery replacement may be required.
According to Vaping professional Jennifer Kim, most devices that are labeled to be broken only require proper cleaning. Always subject your rig to a thorough cleaning before you think it is damaged. And you will be surprised how frequently this puts the matter to rights.
Conclusion
To maintain your electric dab rig does not need complicated processes and expertise. Simple daily routines, a regular deeper cleaning and battery maintenance gives a drastic life to the device and ensures that it performs maximally. These maintenance practices will be relevant regardless of whether a person has a small dab pen or a professional dab rig.
The lookah devices are an example of a quality construction that pays back through good care. Since the Unicorn Mini, and the Seahorse Pro Plus and Q7 Mini, the electric dab rig has designs that allow easy and efficient maintenance. Together with a complete product line of vaporizers, glass bongs, nectar collectors, glass pipes and accessories, everything is encompassed to have superior vaping experiences with Lookah.
Want to see good equipment done to last? Go to the online smoke shops in Lookah vape and see their full line-up of electric rigs, enails, vape pens and dry herb vapors. All these sessions would provide you with the performance and the flavor you rightfully deserve with the proper maintenance and quality equipment.
Frequently Asked Questions
Q: How many times would you clean your electric dab rig?
A: Cleaning after every session is quick and easy, it is just necessary to wipe chambers and connections. Clean on a scheduled basis of 1-2 times a month, or based on the frequency of usage. People who use it at capacity may require weekly deep clean and occasional users may be able to go on a bi-weekly schedule. Daily cleaning will avoid the accumulation and will keep the performance at the optimum level.
Q: Is it possible to clean my dab rig with water?
A: Rinse with water of removable parts that are not electronic that have been alcohol cleaned. Do not immerse batteries and an electronic component in water. In the case of electronic parts, it should be wiped with cotton swabs that have been moistened with isopropyl alcohol and wiped dry as soon as possible. Electronics and water are incompatible.
Q: What are the average length of battery of electric dab rigs?
A: When used well, good electric dab rig batteries have a life of 1-2 years or 300-500 charge cycles. The life of the battery will be determined by the way it will be charged and how frequently it will be used. The best way to ensure the battery lasts is to follow the correct charging habits i.e. not fully depleting and excessive heat. Lookah devices have long lasting batteries when well taken care of.
Q: How can one clean quartz coils and chambers?
A: Pre-wetting of the quartz components Add to 90%/+ isopropyl alcohol 15-30 seconds. Cleanse using soft brushes or cotton swabs in order to remove softened residues. Wash well using warm water and dry well using air. In case of tenacious deposition do the soaking again. Abrasive substances that will scratch the quartz surfaces should never be used.
