If someone had told you that tiny helicopters could capture the world by storm in less than ten years after their introduction into the commercial market, you would have never believed them, and yet here we are. Drones have become so important in every sector that we no longer remember how to perform some tasks without using them.
In the construction sector, for example, drone mapping helps engineers capture a wide field of view of a construction site to get an accurate topographical image. You can think of drone mapping as puzzling together drone images to make a perfect 3D map of an area.
But even an outstanding field such as drone mapping has little room for improvement. That is where Emesent Hovermap wriggles in. If you are a construction engineer curious about the future of drone mapping, you have come to the right place.
Introducing SLAM LiDAR
Just like every modern technology, drone mapping is not foolproof. As a construction engineer, you might have noticed how hard it is to use drones in places where you don’t have a clear line of sight. Capturing good images in such situations is always a gamble since you never know what is on the other side of an obstacle.
Lucky for you, pun intended, there are ways to go around such an obstacle. You see, with SLAM Lidar (short for Simultaneous Localization and Mapping using Light Detection and Ranging), you can navigate all those nooks and crannies you always had difficulty exploring when making your drone maps. And as you would expect, the best way to try out SLAM LiDAR is using the Emesent Hovermap.
Emesent Hovermap: The Savior Of Drone Mapping
Here are just a few ways Emesent Hovermap will transform the future of drone mapping.
1. Beyond Visible Line Of Sight Imaging
Drone mapping is usually all fun and games until you get to a point in your construction project where you can’t see the other side of an obstacle for you to fly the drone and get a perfect image.
In such situations, the only remedy you have is to risk your drone and fly it in the hope that you can trace it back. But who wants to risk their drone like that?
The Emesent Hovermap has angled LiDAR, which allows it to go beyond any obstacle and capture images further than your eye can see. The beauty of the angled LiDAR approach is that it uses an autonomous pilot with an outstanding computer.
You won’t have to constantly tinker with the controls to get a perfect image since the drone will work and swing back into the home position in no time.
2. Capturing Accurate Images In Harsh Weather Conditions
One of the problems you might encounter when working with drones is that they are very delicate gadgets. Even some moisture or dust is bound to put your drone on a sick bed for some time. But with the Emesent Hovermap, all the challenges of your regular drone will become a thing of the past.
You see, the Emesent Hovermap is IP65 rated. Essentially, any electrical device that is IP65-rated can withstand water from different directions, provided that the jet is not so strong. Similarly, it is well protected from dust and other small solids that might want to put your drone down.
With this protection, you know you can use the drone to map out all construction sites without caring about the possible effect on your drone.
3. Precision Engineered And Lightweight To Fit Every Drone
The Emesent Hovermap has gone through one of the best engineering you would expect from such a gadget. All the components of the mapping device are compact within the protective casing, ensuring they last a long time.
As if this is not enough, the manufacturers have gone out of their way to make the Hovermap lightweight. We all know that drones have a low weight tolerance. So if you are wondering whether your drones can bear the extra weight of the Emesent Hovermap, you should know there is nothing to worry about. When flying with the mapping device installed, your drone won’t feel any lag or strain.
4. Expansive Capabilities For Better Performance
The final attribute which makes the Emesent Hovermap the future for all drone mapping processes is how easy it is to expand the gadget’s capabilities. You can use different cables, such as the 3.5mm one or a VGA cable to make the drone more potent. These expansive capabilities also make the Emesent Hovermap compatible with many drones because it is easy to connect them.
Finishing Up
In the many years drones have existed, many companies have been trying to make a device that uses LiDAR technology in drone mapping but none has made such a fantastic tool as the Emesent Hovermap.
The Emesent Hovermap uses SLAM LiDAR and automated piloting to map regions you couldn’t get to under normal circumstances. The device also enjoys optimal precision and accurate imaging in harsh weather, which makes it a must-have for any construction engineer. What are you waiting for? Place your order today!
