Are you experiencing that dreaded burnt taste when vaping? Don’t worry; we’ve got you covered! This guide will walk you through the steps to fix a burnt vape. Whether you’re new to vaping or a seasoned vaper, troubleshooting those unpleasant burnt hits is essential to enjoying your vaping experience to the fullest.
Determining the Cause
When your vape tastes burnt, it can be frustrating. But before you panic, take a moment to determine the cause of this unpleasant experience. One possible reason could be that your coil is worn out and needs to be replaced. Over time, coils lose their ability to heat evenly, resulting in that dreaded burnt taste.
Another factor to consider is the wattage setting on your device. If it’s too high for the coil you’re using, it can quickly burn out and produce that undesirable flavor. Additionally, chain vaping – taking puff after puff without giving your device a break – can lead to overheating and a burnt taste.
You are furthermore, using low-quality e-liquids or letting your tank run dry might also contribute to the burnt taste issue. By pinpointing the specific cause of the problem, you’ll be better equipped to troubleshoot and fix it effectively.
Troubleshooting Steps
If your vape tastes burnt, it can be frustrating. However, troubleshooting this issue is relatively easy. You can start by checking the coil. Following the steps below, you can fix a burnt vape and enjoy a smoother experience!
Tips 1: Cleaning and priming the coil
Removing the coil from the tank:
Unscrew the tank from the vape device. Depending on the tank design, unscrew the coil from the base or detach it from the tank.
Cleaning the coil:
Rinse the coil under warm water to remove any gunk or residue. Gently brush the coil with a soft toothbrush to dislodge any stubborn debris. Allow the coil to dry completely before proceeding.
Priming the coil with e-liquid:
Drip a few drops of e-liquid onto the coil’s cotton-wicking material. Allow the coil to sit for a few minutes to ensure the wick absorbs the e-liquid thoroughly. Reassemble the tank and attach it back to the vape device.
Tips 2: Checking the wicking
Examining the wick for dryness or damage:
Examining the Wick for Dryness or Damage: Open the tank and inspect the wicking material inside the coil. If the wick appears dry, it may not adequately saturate with e-liquid. Look for signs of damage, such as frayed or burnt wicks.
Adjusting the wicking material if necessary:
If the wick is dry, gently poke it with a needle or pin to create small channels for improved e-liquid flow. If the wick is damaged, replacing the coil entirely is best.
Tips 3: Adjusting power settings
Lowering wattage or temperature settings:
Access the device’s settings menu and adjust the wattage or temperature to a lower setting. Start with a lower power level and gradually increase it until you find a satisfying balance.
Avoiding chain vaping and allowing sufficient time between puffs:
Take shorter and less frequent draws, allowing the coil to cool down between puffs. Chain vaping, which involves consecutive puffs without breaks, can cause the coil to overheat and result in a burnt taste.
Tips 4: Evaluating e-liquid quality
Checking for burned or expired e-liquid:
Examine the e-liquid bottle for any discoloration or changes in consistency. If the e-liquid smells burnt or has an off-putting odor, it may have gone wrong. It’s best to dispose of expired or spoiled e-liquid and replace it with a fresh bottle.
Choosing high-quality e-liquid brands:
Opt for reputable e-liquid brands that use quality ingredients. Consider user reviews and recommendations to ensure a satisfactory vaping experience.
Tips 5: Replacing the coil or tank (if necessary)
Signs indicating the need for coil or tank replacement:
Persistent burnt taste despite troubleshooting efforts. Noticeable damage or deterioration of the coil or tank. Excessive gurgling, leaking, or poor vapor production.
Proper installation of a new coil or tank:
Follow the manufacturer’s instructions for replacing the coil or tank. Ensure a secure and snug fit to prevent leakage—Prime the new coil before use by following Step 1’s priming process.
Remember to be patient and methodical when troubleshooting, and always prioritize safety when handling vape components.
Preventive Measures
To prevent your vape from burning out prematurely, it’s essential to take some preventive measures. One crucial step is to prime your coils properly before using them. This involves saturating the wick with e-liquid and allowing it to soak for a few minutes before vaping.
Another critical preventive measure is to avoid chain vaping, which can lead to the coil overheating and burning out quickly. Take breaks between puffs to give the coil time to cool down and prolong its lifespan.
Regularly cleaning your vape tank and changing coils are critical preventive steps. Residues from old e-liquids can build up in the tank and affect the flavor of your disposable vapes, while worn-out coils are more likely to burn out.
Storing your vape properly in a cool, dry place away from direct sunlight can help maintain its performance and prevent premature damage. By following these preventive measures, you can ensure a longer lifespan for your vape device.
Conclusion
Knowing how to fix a burnt vape is crucial for any vaper. By determining the cause, following troubleshooting steps, and implementing preventive measures, you can extend your device’s lifespan and enjoy a better vaping experience.
Always stay informed about proper maintenance techniques and take good care of your equipment to avoid encountering burnt tastes in the future. Keep these tips in mind so you can keep vaping smoothly without any unwanted burnt flavors ruining your enjoyment. Happy vaping!
